Fillcontrol Recharge systems Reflex Winkelmann GmbH Fillset, Plus Compact, Auto, etc.

Refilling fittings "Fillset"
It is a prefabricated reinforcement unit with a built-in system separator according to DIN EN 1717 standard for permanent connection of heating or cooling circuits with drinking water supply systems. "Fillset" can be used for direct manual recharge or installed in front of automatic recharge devices such as "Fillcontrol Auto". Throughput capacity: 0.8 m3/h. Max. operating temperature: 60 °C. Max. working pressure: 10 bar. Reflex offers the following "Fillset" models: "Fillset" with a built–in flow meter for measuring the amount of make-up water; "Fillset Contact" with an electronic flow meter that can be read by any Reflex control device; "Fillset Compact" is a very compact and simple design without a flow meter.

Fillset. Operation manual.
Fillset compact. Operation manual.

Fillcontrol Plus Compact
Compact solution for small systems with a membrane expansion tank. It has an integrated system separator in accordance with the DIN EN 1717 standard. The control device operates completely autonomously by means of an integrated pressure sensor in the system. Throughput capacity: 0.4 m3/h. Max. operating temperature: 70 °C. Max. working pressure: 10 bar.

Fillcontrol Plus Compact. Operation manual.

Fillcontrol Auto
Combines the maximum level of flexibility and ease of operation. Completely independent of the pressure in the drinking water supply system, thanks to the built-in pump. It works independently of both pressure and water level. "Fillcontrol Auto" can be connected directly to the hydraulic separator. Feed capacity: from 0.12 to 0.18 m3/h. Max. operating temperature: 30 °C. Max. working pressure: 10 bar.

Fillcontrol Auto Compact. Operation manual.

Fillcontrol Auto for water-glycol mixture
For holosupply systems "Fillcontrol Auto" is also offered in a version compatible with mixtures containing glycol. It has full functionality of "Fillcontrol Auto". However, it does not have a hydraulic separator, since system recharge units are usually used, for example, a mixing unit in systems with a solar collector. Feed capacity: ≤ 4 m3/h. Max. operating temperature: 110 °C. Max. working pressure: 10 bar.

Fillcontrol Plus
Feeding systems with membrane expansion tanks has never been so simple. "Fillcontrol Plus" offers full functionality of the "Reflex Control Basic" control device even for small systems. For separation in drinking water supply systems, a "Fillset" can be installed in front of it on the water supply. Throughput capacity: 1.4 m3/h. Max. operating temperature: 90 °C. Max. working pressure: 10 bar.

Fillcontrol Plus. Operation manual.
Fillcontrol Plus Compact. Operation manual.

Electromagnetic ball valve for "Reflexomat"
When using the Reflexomat pressure maintenance device, the make-up water can be supplied directly using an electromagnetic ball valve. The control unit of the device "Reflexomat" activates this function at increased pressure when filling the expansion tank. The "fillset" is installed in front of it to separate the system during recharge from the drinking water supply system. Throughput capacity: 1.4 m3/h. Max. operating temperature: 90 °C. Max. working pressure: 10 bar.

Questionnaire

Catalog