Fillsoft Water Treatment Systems Reflex Winkelmann GmbH Fillsoft, Softmix, Fillmeter, etc.

Fillsoft Water Softener
The water softener is available in two main versions. Depending on the required output, you can purchase either "Fillsoft I" with one or "Fillsoft II" with two cartridges with synthetic resin. Softening works on the principle of positive ion exchange. Hard drinking water is supplied through an ion exchanger, where magnesium and calcium ions are replaced by sodium ions of the resin in the cartridge, and the water is softened. Max. working pressure: 8 bar Max. operating temperature: 40 °C Output of softened water "Fillsoft I | II": 6000 | 12000 °dH Volumetric flow rate of softened water: ≤ 0.4 m3/h Height: 600 mm

Softmix mixing device
After softening with the help of "Fillsoft", the water hardness is reduced to readings below 0.11 °dH, which is often lower than the required water hardness. In addition, this leads to increased wear of Fillsoft cartridges. With the help of the "Softmix" mixing device, the required water hardness is set by means of controlled mixing of filtered water and optimization of wear.

Programmable electronic flow meter Fillmeter
"Fillmeter" reliably monitors the duration of operation of the cartridge. "Fillmeter" also calculates the achievable amount of softened water based on the input data and brings it in line with full-scale measurements. Max. working pressure: 10 bar. Max. operating temperature: 65 °C.

Fillsoft Replacement Cartridges
After a quick and easy replacement, Fillsoft replacement cartridges fully restore their operability. Softened water output: 6000 L at 0°dH.

A set for measuring the total hardness of water
The Total water hardness measurement kit includes everything you need to accurately determine water hardness. Allows you to accurately measure and control the hardness of filtered and make-up water.

Questionnaire

Catalog